Exhaust fans are an appliance used to draw out moisture and air from a room utilizing a reverse fan. In order for the unit to be utilized the right way it has to be vented to the exhaust. If not then all it is able to do is draw in the moist air and press it into other parts of the house. With the spoton ventilation theory you will have the ability to change its policy and force it outside where it belongs.
First you should run your way into the roof crawl space that is over the bathroom. You may also attempt to unscrew the exhaust from the ceiling and allow it to hang down hanging by the wire connectors. Quantum the hole size in a circular pattern and buy an aluminum coil dryer hose and two c-clamps that are somewhat bigger.
Fan
Position the c-clamp onto the hose and associate it to the exhaust hole. Ensure that you fasten the hose using a c-clamp screw. Descry inside at the hole in the ceiling and hunt for the nearest outside wall. Quantum the height of the wall from outside. Now you will add six inches to the determination so that you are able to put 2x4's into the rafters.
Drill a hole in the siding three inches over the mark you made for the wall height also added to the six inches. Utilize a pencil to prescription the size of the new hose and where it must go. Now inset an electric vertical saw in the drilled hole and cut in a circle pattern.
Reach in the hole and move the vent hose, pushing it a few inches through. Place the c-clamp on the hose and associate it to the outside exhaust fan vent hole. Fasten this and then apply the outside silicon caulk nearby the hold and siding along the back of the vent. Thrust the hose inside so that it is flush with the wall.
How to Vent Your Bathroom FanRecommend : Pliers Cutters Screwdriver Torx Tool My pet pillow
ไม่มีความคิดเห็น:
แสดงความคิดเห็น